61 00... Diagnosis for Condition Based Service: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
Red symbol for pre-delivery check
The vehicle is coded at the end of line so that the red symbol for the pre-delivery check is shown in the Next Service indicator (same symbol as vehicle check).
The symbol is a reminder to the Service staff that the pre-delivery check has not yet been carried out on this vehicle.
NOTE:
Do not carry out a reset.
Do not confuse this function with the "Vehicle check" scope of maintenance work. Do not run a reset with the KOMBI.
When executing the pre-delivery check with the "Transport mode/Pre-delivery check" service function: The symbol will be suppressed automatically after the service function has been executed.
| Item | Explanation |
|---|---|
| 1 | Function and component selection |
| 2 | Service functions |
| 3 | Maintenance |
| 4 | Transport mode/pre-delivery check |
| 5 | CBS correction, tester data |
| 6 | Reset CBS Condition Based Service |
| 7 | CBS vehicle data correction |
4 service functions are available in the BMW diagnosis system for maintenance:
- Transport mode/pre-delivery check
- CBS correction, tester data
- Reset CBS
- CBS vehicle data correction