Socket housing

WARNING: This page is about a different variant/trim than selected.

Press locks (1) on cap (2) upwards on both sides.

Detach cap from contact carrier (3).

NOTE: Detaching the cap releases the secondary locks of the socket contacts.

Fig 1: Pressing Locks On Cap Upwards On Both Sides

Courtesy of BMW OF NORTH AMERICA, INC.

Hold down retaining hook (1) of socket contact in opening of contact carrier with a small screwdriver.

Pull wire with socket contact in direction of arrow as far as secondary lock (2).

Fig 2: Holding Down Retaining Hook Of Socket

Courtesy of BMW OF NORTH AMERICA, INC.

Hold down retaining hook in secondary lock (1) again and pull cable with socket contact (2) completely out of contact carrier (3).

Fig 3: Holding Down Retaining Hook In Secondary Lock

Courtesy of BMW OF NORTH AMERICA, INC.