61 67 010 Removing and installing/replacing washer pump of headlight washer system

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

NOTE: Catch any escaping washer fluid if necessary.

Disconnect plug connection (1).

Unlock split pin (3) and detach hose (2) from washer pump of headlight washer system (4).

Turn washer pump of headlight washer system (4) and pull in direction of arrow out of fluid reservoir for windscreen washer unit (5).

Fig 1: Identifying Split Pin, Detach Hose And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace strainer for washer pump of headlight washer system.
Coat sealing ring of washer pump for headlight cleaning system with antiseize agent.
Lay hose of washer pump for headlight cleaning system without kinks
Fill fluid reservoir