61 35 954 Removing and installing/replacing interior antenna for comfort access system (rear)

WARNING: This page is about a different variant/trim than selected.

Special tools required:

IMPORTANT: Carefully unclip catches (2) on trim (1) (risk of damage).

Move with special tool 00 9 323 from below behind trim (1) and release catches (2).

Release trim (1) towards rear from catches (3).

If necessary, disconnect plug connections and remove trim (1).

Fig 1: Disconnecting Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1 and 3) must not be damaged.

Guides (2) must not be damaged

Fig 2: Identifying Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unlock retaining hook (2) and remove luggage compartment antenna for comfort access system (3).

Fig 3: Identifying Retaining Hook And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.