61 12 200 Replacing wiring harness in left or right front door
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
- Close front side window completely
- Remove FRONT DOOR TRIM PANEL
- Remove FRONT ACOUSTIC INSULATION
Unlock plug connection (1) on door lock and disconnect.
Unlock plug connection (4) on power window and disconnect.
Disconnect plug connection (2) on outside door handle light.
Disconnect plug connection (5) on door mirror.
Unclip door wiring harness at points (3).
Installation:
Make sure door wiring harness is correctly laid.
Release screw (1), fold door wiring harness plug on A-pillar (2) downwards slightly and remove.
Unlock plug connection behind and disconnect.
Pull rubber grommet (3) out of front door.
Feed out door wiring harness towards front to A-pillar and remove.