Storage Location

C8

Consisting of:

1. 9 = 0492368 Holding sleeve
   NOTE: (guide sleeve) For installing wheel bearings
   Fig 1: Identifying Bush, Washer And Holding Sleeve (0492359)

   Courtesy of BMW OF NORTH AMERICA, INC.
2. 8 = 0492367 Bush
   NOTE: (draw-in bushing for rear axle shaft)
3. 7 = 0492366 Washer
   NOTE: (thrust washer) For installing wheel bearing, rear
4. 6 = 0492365 Holding sleeve
   NOTE: (guide sleeve) For installing wheel bearing, rear/model series: E30
5. 5 = 0492364 Washer
   NOTE: (pull-out disc)
6. 4 = 0492363 Bell housing
   NOTE: For gripping when removing wheel bearing, rear/model series: E30
7. 3 = 0492362 Nut
   NOTE: Series: E30, E46 Replaced by 33 4 303 (0 496 551)
8. 2 = 0492361 Nut
   NOTE: (Nut with bearing) Model series: E30, E46 Replaced by 33 4 302/0 496 536
9. 1 = 0492360 Spindle
   NOTE: (spindle) Model series: E30, E46 Replaced by 33 4 301/0 496 535