LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Rear Axle - Special Tools - E90) >> Rear Axle >> 33-4030 Tool >> 0492349 334030 Tool Mechanical tool >> Storage Location

Storage Location

WARNING: This page is about a different variant/trim than selected.

C7

Consisting of:

  1. 9 = 0492358 Nut
    NOTE: (Nut) replaced with 334303/0496551
  2. 8 = 0492357 Nut
    NOTE: (Nut with bearing) Model series: E28 Replaced by 33 4 302 (0 496 536)
  3. 7 = 0492356 Washer
    NOTE: (thrust washer) For installing wheel bearing, rear/model series: E28/model: 525i, 528i Discontinued, only available via complete tool
  4. 6 = 0492355 Holding sleeve
    NOTE: (guide sleeve) For installing wheel bearing, rear/model series: E28/model: 525i, 528i. Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).
Fig 1: Identifying Washer, Nut And Holding Sleeve (0492349)
G06966019Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: (Tool set) For removing and installing rear wheel bearings Components 33 4 032, 33 4 038 and 33 4 039 are discontinued and are replaced in the order by 33 4 301, 33 4 302 and 33 4 303


C7

Consisting of:

  1. 9 = 0492358 Nut
    NOTE: (Nut) replaced with 334303/0496551
  2. 8 = 0492357 Nut
    NOTE: (Nut with bearing) Model series: E28 Replaced by 33 4 302 (0 496 536)
  3. 7 = 0492356 Washer
    NOTE: (thrust washer) For installing wheel bearing, rear/model series: E28/model: 525i, 528i Discontinued, only available via complete tool
  4. 6 = 0492355 Holding sleeve
    NOTE: (guide sleeve) For installing wheel bearing, rear/model series: E28/model: 525i, 528i. Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).
  5. 5 = 0492354 Washer
    NOTE: (thrust washer) For installing wheel bearing, rear/model series: E28/model: 518, 520i Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).
  6. 4 = 0492353 Holding sleeve
    NOTE: (guide sleeve) For installing wheel bearing, rear/model series: E28/model: 518, 520i. Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).
  7. 3 = 0492352 Washer
    NOTE: (thrust washer) For removing wheel bearing, rear/model series: E28/model: 518, 528i. Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).
  8. 2 = 0492351 Spindle
    NOTE: (spindle) Model series: E28 Replaced by 33 4 301 (0 496 535)
  9. 1 = 0492350 Bell housing
    NOTE: For counter support when removing the rear wheel bearing Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).
scientia non olet · About LEMON Manuals