LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Rear Axle - Special Tools - E90) >> Rear Axle >> 33-3260 Tool >> 0492287 333260 Tool Minimum set: Mechanical tools Mechanical tool >> SI number

SI number

WARNING: This page is about a different variant/trim than selected.

01 05 90 (207)

Fig 1: Identifying Washer And Holding Sleeve (0492287)
G04739445Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

  1. 8 = 0492295 Washer
    NOTE: (support disc) for fitting the wheel bearing - Series: E38, E52, E53, E60, E61, E83, RR1
  2. 7 = 0492294 Washer
    NOTE: (thrust washer) For fitting the drive flange - Series: E31, E34, E38, E46/16, E52, E53
  3. 6 = 0492293 Holding sleeve
    NOTE: (fitting bush) For fitting the drive flange and for extracting the wheel bearing - Series: E38, E52, E53, E60, E61, E83, RR1
  4. 5 = 0492292 Washer
    NOTE: (thrust washer) For fitting the wheel bearing into the wheel carrier - Series: E31
  5. 4 = 0492291 Holding sleeve
    NOTE: (fitting bush) For fitting the wheel bearing into the wheel carrier - Series: E31, E34, E38, E46/16, E52, E53, E83, RR1
  6. 3 = 0492290 Holding sleeve
    NOTE: (fitting bush) For extracting the wheel bearing from the wheel carrier - Series: E31, RR1
  7. 2 = 0492289 Holding sleeve
    NOTE: (spacer sleeve) For extracting the wheel bearing from wheel carrier and for fitting the drive flange - Series: E31, E34, E38, E46/16, E52, E53, E83
  8. 1 = 0492288 Spindle
    NOTE: (Spindle with 2 nuts) Series: E31, E34, E38, E46/16, E52, E53, E60, E61, E83, RR1 Replaced by 33 4 300/0 496 534
scientia non olet · About LEMON Manuals