41 33 Front trim panel
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - FRONT TRIM PANEL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Front panel to carrier support | E81/E82/E87/E88/E90/E91/E84 | M6 | 10 Nm | |
| E92/E93 | M6 | 12 Nm | |||
| E85/E86 | M8x18 | 19 Nm | |||
| E89 | M8x18 | 19 Nm | |||
| E89 | M6 | 8 Nm | |||
| 2AZ | Headlight holder to front panel | E81/E82/E87/E88/E84 | M6x18 | 8 Nm | |
| E90/E91 | M6x18 | 4.5 Nm | |||
| E92/E93 | M6x18 | 6 Nm | |||
| 3AZ | Headlight holder to side panel, front | E81/E82/E87/E88/E90/E91/E92/E93/E84 | Sheet metal screw ST4.8x22 | 2.5 Nm | |
| E90/E91/E92/E93 | M6 | 6 Nm | |||