33 41 Wheel Bearings
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - WHEEL BEARINGS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Drive flange hub to output shaft | E81/E82/E87/E88/E90 (not S65)/E91/E92 (not S65)/E93 (not S65) | M27 | Replace collar nut, lightly oil contact face | 420 Nm |
| E84/E90 (only S65)/E92 (only S65)/E93 (only S65) | M27 | Replace collar nut, lightly oil contact face | 300 Nm | ||
| E81/E82/E87/E88/E90 (not S65)/E91/E92 (not S65)/E93 (not S65) | M24 | Replace collar nut, lightly oil contact face | |||
| Jointing torque | 145 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 2AZ | Wheel bearing to wheel carrier | E84 | M10 | Replace screws | |
| Jointing torque | 30 Nm | ||||
| Angle of rotation | 110 ° | ||||