33 17 Rear Axle Final Drive Suspension
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - REAR AXLE FINAL DRIVE SUSPENSION
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Rear axle final drive (if nec. with bracket for vibration damper) to rear axle carrier | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 (front) | Observe repair instructions. | 100 Nm |
| E81/E82/E84/E87/E88/E90/E91/E92/E93 | M14 (rear) | Observe repair instructions. Replace nut |
165 Nm | ||
| 2AZ | Vibration damper to bolt connection, rear axle final drive | E81/E82/E84/E87/E88/E90/E91/E93/E92/auser S65 | M12 | 68 Nm | |
| 3AZ | Vibration damper on bracket | E81/E82/E84/E87/E88/E90/E91/E93/E92/auser S65 | M12 | 68 Nm | |
| 4AZ | Vibration absorber with additional mass to screw connection of rear axle differential | E92.320d A | M12 x104 | 77 Nm | |