31 60 Output Shaft
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - OUTPUT SHAFT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft bearing support to oil sump | E84/E90/E91/E92 | M8 | 21.4 Nm | |
| 2AZ | Output shaft to wheel hub | E90/E91/E92 | M27 | Replace collar nut, lightly oil contact surface. | 420 Nm |
| 3AZ | Output shaft to wheel hub | E84 | M16 | Replace collar bolt and spring. | |
| Jointing torque | 210 Nm | ||||
| Angle of rotation | 90 ° | ||||