31 35 Stabilizer Bar
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - STABILISER BAR
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Retaining bar for stabiliser to front axle carrier | E81/E82/E84/E87/E90/E88/E91/E92/E93 | M8 | Replace nuts | 21 Nm |
| E90/Allrad, E91/Allrad, E92/Allrad | M10 | Replace screws | 60 Nm | ||
| E84/Allrad | M10 | Replace screws | 56 Nm | ||
| 2AZ | Stabiliser link to stabiliser/spring strut shock absorber | E81/E82/E87/E88/E90/E91/E92/E93 | M10 | Replace nut | 58 Nm |
| E84 | M10 | Replace nut | 56 Nm | ||