31 12 Trailing Arms and Struts
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - TRAILING ARMS AND STRUTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Trailing link to front axle support | E81/E82/E84/E87/E88/E90/E91/E93/E92 | M12 8.8 | Replace screw and nut. TIGHTEN DOWN IN NORMAL POSITION . |
|
| Jointing torque | 68 Nm | ||||
| Angle of rotation | 90 ° | ||||
| E81/E82/E87/E90/E91/E92/E93 | M12 10.9 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
|||
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | Trailing link to swivel bearing | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M14 | Replace nut. | 175 Nm |
| 3AZ | Wishbone to front axle support | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 8.8 | Replace screw and nut. TIGHTEN DOWN IN NORMAL POSITION . |
|
| Jointing torque | 68 Nm | ||||
| Angle of rotation | 90 ° | ||||
| E81/E82/E87/E90/E91/E92/E93 | M12 10.9 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
|||
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 4AZ | Wishbone to swivel bearing | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M14 | Replace nut. | 175 Nm |
| E84/Allrad, E90/Allrad, E91/Allrad, E92/Allrad | M14 | Replace nut. | 80 Nm | ||
| 5AZ | Compression strut to front axle support | E84/Allrad, E90/Allrad, E91/Allrad, E92/Allrad | M12 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
|
| Jointing torque | 68 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 6AZ | Compression strut to guide joint | E84/Allrad, E90/Allrad, E91/Allrad, E92/Allrad | M14 | Replace nut. | 80 Nm |
| 7AZ | Guide joint to swivel bearing | E84/Allrad, E90/Allrad, E91/Allrad, E92/Allrad | M10 | Recut thread Replace screws. |
60 Nm |