Crankshaft and Bearings (Main Bearing Journal Numbers 2, 3, 4, 5, 6)
CRANKSHAFT AND BEARINGS SPECIFICATION
| Ground sizes of main bearing journals | Main bearing journal numbers 2,3,4,5,6 | |
| Original (identification mark S/1) | mm | 55.999 ... 55.993 |
| Original (identification mark S/2) | mm | 55.992 ... 55.987 |
| Original (identification mark S/3) | mm | 55.986 ... 55.980 |
| Crankshaft bearing clearance, radial | mm | 0.020 ... 0.046 |
| Max. permitted runout at centre crankshaft journal | mm | 0.15 |