Crankshaft and Bearings (Guide Bearing Journal Number 7)
CRANKSHAFT AND BEARINGS SPECIFICATION
| Ground sizes of main bearing journals | Guide bearing journal number 7 | |
| Original (identification mark S/1) | mm | 64.999 ... 64.993 |
| Original (identification mark S/2) | mm | 64.992 ... 64.987 |
| Original (identification mark S/3) | mm | 64.986 ... 64.980 |
| Crankshaft bearing clearance, radial | mm | 0.020 ... 0.046 |
| Max. permitted runout at centre crankshaft journal | mm | 0.15 |