32 41 100 Removing and installing/replacing belt pulley on vane pump for power steering
NOTE:
Carry out preliminary work as described in the procedure for replacing drive belt. See REPLACING DRIVE BELT FOR ALTERNATOR (N54)
or REPLACING DRIVE BELT FOR ALTERNATOR (N55)
.
Slacken screws (1)
Relieve tension on drive belt and remove from belt pulley (2). See DRIVE BELT (N54) or DRIVE BELT (N55) .
Unscrew bolts (1) and remove belt pulley (2).
Installation note:
Lettering on belt pulley (2) must point forwards.
Tightening torque 32 41 3AZ .