Pistons with Rings and Pins (Pins)
PISTONS WITH RINGS AND PINS SPECIFICATION
| Piston and pin are paired to each other - replace together only. | ||
| Measuring point "A" (position) | mm | 12 |
| Piston diameter at measuring point "A" | ||
| Original (new dimension) | mm | 83.98 ... 84.01 |
| Repair stage (new dimension) | mm | 84.06 ... 84.09 |
| Oversize (new dimension) | mm | 84.23 ... 84.26 |
| Piston installation clearance (piston new) | mm | 0.01...0.03 |
| Piston installation clearance (piston worn) | mm | 0.02...0.08 |
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 |