Necessary preliminary tasks

Remove adapter (1).

Installation:

Note installation position.

Fig 1: Identifying Adapter

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws.

Tightening torque 24 31 3AZ .

Fig 2: Locating Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Slide special tool 24 1 184 completely into puller 24 1 180 .

Fig 3: Sliding Special Tool (24 1 184) Into Puller (24 1 180)

Courtesy of BMW OF NORTH AMERICA, INC.

Attach special tool 24 1 180 and secure with screw (1).

Insert screw (2) and release oil supply unit from transmission housing.

Fig 4: Identifying Screws With Special Tools (24 1 180)

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws.

Tightening torque 24 31 1AZ .

Fig 5: Locating Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Detach cover (1) from pump body (2).

Replace O-rings (3 + 4).

Installation:

Pay attention to installation position of gears during disassembly.

Fig 6: Identifying Cover, Pump Body And O-Rings

Courtesy of BMW OF NORTH AMERICA, INC.