Necessary preliminary tasks

IMPORTANT: After completion of work, check TRANSMISSION OIL LEVEL .
See AUTOMATIC TRANSMISSION - OPERATING FLUIDS .
Failure to comply with this instruction will result in serious damage to the transmission.

Secure transmission with special tool 24 0 200 to assembly stand 00 1 450 .

Fig 1: Securing Transmission With Special Tool (24 0 200) And (00 1 450)

Courtesy of BMW OF NORTH AMERICA, INC.

Attach special tool 24 2 353 to drive shaft (1).

Fig 2: Identifying Special Drive Shaft Tool (24 2 353)

Courtesy of BMW OF NORTH AMERICA, INC.

Screw in special tool 24 2 351 until it is firmly connected with shaft seal.

Screw in special tool 24 2 352 to remove shaft seal.

Fig 3: Removing Shaft Seal Using Special Tool (24 2 351) And (24 2 352)

Courtesy of BMW OF NORTH AMERICA, INC.

Oil sealing lip on shaft seal.

Drive in shaft seal (1) with special tool 24 2 360 as far as it will go.

Fig 4: Installing Shaft Seal Using Special Tool (24 2 360)

Courtesy of BMW OF NORTH AMERICA, INC.