3135005 Removing and installing/replacing push rod (stabilizer link) for left/right stabilizer

Note (M3 only):

Make sure stabilizer link is installed in correct position.

Connection, stabilizer link to spring strut
Connection, stabilizer link to stabilizer

Fig 1: Identifying Connections Of Stabilizer Link To Spring Strut And Stabilizer Link To Stabilizer
Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and remove bracket for brake hose.

Release nut (3) and remove stabilizer link (2).

Installation:

Replace self-locking nuts.

Tightening torque, see 31 35 2AZ in 31 35 STABILIZER BAR .

Fig 2: Identifying Nuts For Brake House Bracket And Stabilizer Link

Courtesy of BMW OF NORTH AMERICA, INC.