4134041 Stripping Operations - Replacing Tail Panel
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
- Remove and install rear bumper trim (FR number: 5112156)
- Remove and install carrier for bumper trim (FR number: 5112050)
- Remove and install guide for bumper, rear center (FR number: 5112825)
- Remove and install guide for bumper, rear left (FR number: 5112801)
- Remove and install guide for bumper, rear right (FR number: 5112801)
- Remove both rear lights (FR number: 6321180)
- Remove luggage compartment floor trim panel
- Upper tail panel trim (FR number: 5146050)
- Remove and install rear lid striker (FR number: 5124130)
- Remove left luggage compartment wheel arch panel (FR number: 5147151)
- Remove right luggage compartment wheel arch panel (FR number: 5147161)
- Remove and install battery (FR number: 6121010)
- Release wiring harness on tail panel and tie to one side
- Release rear lid seal