Preparation Of New Part

Mark new part in accordance with severance cuts above and cut.

Installation: 

Adjust new part to fit with straightening attachment or universal mount.

Weld in REINFORCING PANELS  at all severance cuts.

Apply window glass adhesive to cavity acoustic baffle  . See 4100... INSTALLING A CAVITY ACOUSTIC BAFFLE (EXPANDED)  or 4100... INSTALLING A CAVITY ACOUSTIC BAFFLE (NOT EXPANDED)  (1).

Apply ADHESIVE  in area (2).

Fig 1: Identifying Adhesive Applying Areas On Door Pillar

Courtesy of BMW OF NORTH AMERICA, INC.