63 17 060 Removing and installing (replacing) left or right front fog lamp

NOTE: The time value of this job does not include adjustment of the FOG LAMPS!

Necessary preliminary tasks

Disconnect plug connection (1).

Unfasten screws (2).

Remove fog lamp (3) towards rear from bumper trim (4).

Fig 1: Identifying Plug Connection, Screws And Fog Lamp

Courtesy of BMW OF NORTH AMERICA, INC.

Version with M Technic aerodynamic kit:

Disconnect plug connection (1).

Unfasten screws (2).

Remove fog lamp (3) towards rear from bumper trim.

Installation:

Tab (4) of fog lamp (3) must be correctly seated in holder (5).

Fig 2: Identifying Plug Connection, Screws, Fog Lamp And Fog Lamp Tab

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: