Necessary preliminary tasks

Release screws (1).

Remove guide (2).

Fig 1: Identifying Screws And Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Fig 2: Identifying Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove cover (2).

Fig 3: Identifying Screws And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and remove multifunction pan.

Tightening torque, see 51 71 9AZ in 51 71 SEALS AND LOOSE BODY PARTS .

Fig 4: Identifying Multifunction Pan Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Seals (1) on multifunction pan (2) must be replaced each time they are removed.

Fig 5: Identifying Seals On Multifunction Pan

Courtesy of BMW OF NORTH AMERICA, INC.