Necessary preliminary tasks

WARNING: To avoid injury, cover holder (1) on support tube (2).

Fig 1: Identifying Cover Holder And Support Tube

Courtesy of BMW OF NORTH AMERICA, INC.

Detach wiring harness (3) from support tube (2).

Release screws (1) of heater on support tube (2).

Tightening torque 64 11 6AZ .

Fig 2: Identifying Heater Screws And Support Tube

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) on right and left on support tube (2).

Tightening torque, see 51 71 5AZ in 51 71 SEALS AND LOOSE BODY PARTS .

Fig 3: Identifying Nuts On Right And Left On Support Tube

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) of heater on support tube (2).

Tightening torque, see 51 71 6AZ in 51 71 SEALS AND LOOSE BODY PARTS .

Fig 4: Identifying Heater Screw And Support Tube

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) on support tube (2).

Tightening torque, see 51 71 5AZ in 51 71 SEALS AND LOOSE BODY PARTS .

Fig 5: Identifying Screw And Support Tube

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on support tube (2) from bracket (3).

Tightening torque, see 51 71 4AZ in 51 71 SEALS AND LOOSE BODY PARTS .

Detach support tube (2) with a 2nd person helping and remove.

Fig 6: Identifying Screws, Support Tube And Bracket

Courtesy of BMW OF NORTH AMERICA, INC.