Special tools required

• 00 9 323

Slide special tool 00 9 323 under the front edge of button (1) and lift button (1) out.

Pull button (1) out of rear lid (2).

Fig 1: Pulling Button Out Of Rear Lid

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug (1) and remove button (2).

Installation: 

Perform function check with rear lid open.

Fig 2: Identifying Plug And Button

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carefully release catches (1) and remove microswitch (2).

Fig 3: Identifying Microswitch With Catches

Courtesy of BMW OF NORTH AMERICA, INC.