Necessary preliminary tasks

Remove REAR BUMPER TRIM
NOTE: The operation is described on the left side; proceed in the same way for the right side.

E93 only:

Release antenna holders (1 and 2) from holder (3).

Installation:

If necessary, replace faulty aerial holders (1 and 2).

Fig 1: Identifying Antenna Holders And Holder

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, disconnect plug connection at RDC trigger transmitter.

Release screws (1 and 2).

Release nut (3) and remove holder (4).

Fig 2: Identifying Holder With Nut And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) must not be damaged or missing.

E90/E91 only:

Catches (2) must not be damaged or missing.

Replacement:

Predrill FIXING HOLES FOR RDC TRIGGER TRANSMITTER (for Sports package in construction period from 03/09 to 09/09).

Fig 3: Identifying Catches

Courtesy of BMW OF NORTH AMERICA, INC.