22 11 100 Replacing right engine support arm (N54T)

Necessary preliminary tasks: 

• Remove right ENGINE MOUNT 
• Remove reinforcement plate (AWD)
• Remove catalytic converters  . See 18 32 050 REMOVING AND INSTALLING/REPLACE CATALYTIC CONVERTER FOR CYLINDERS 1-3 (N54T) or 18 32 060 REMOVING AND INSTALLING/REPLACE CATALYTIC CONVERTER FOR CYLINDERS 4-6 (N54T)

Release screws.

Remove engine support arm from engine.

Tightening torque 22 11 3AZ

Fig 1: Locating Engine Support Arm Screws

Courtesy of BMW OF NORTH AMERICA, INC.