65 50 055 Removing and installing/replacing Central Information Display (Version 1)
IMPORTANT:
Read and comply with NOTES
on protection against electrostatic damage (ESD protection).
Necessary preliminary tasks:
- Remove CENTER FRESH-AIR GRILLE .
- Remove CAR COMMUNICATION COMPUTER .
Open monitor (1) as illustrated.
Unfasten screws (2).
Release screws (1).
Disconnect plug connection (2) and release associated wiring harness.
Installation:
Make sure wiring harness is correctly laid and secured.
Raise central information display (3) on passenger side.
Disconnect plug connection (4).
Feed out associated wiring harness and remove central information display (3).
Installation:
Make sure wiring harness of central information display (3) is correctly routed.