17 11 035 Remove and install or replace the fan cowl with electric fan (N53, N54, N54T, N55)

Necessary preliminary work:

Only automatic or twin-clutch gearbox:

Release screw.

Detach cooler (1) for automatic transmission from fan cowl (2).

Fig 1: Locating Cooler Screws For Automatic Transmission

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock connector (1) and remove.

Unclip line (2) from fan cowl.

Cut open cable strap (3).

Release screw.

Fig 2: Unclipping Line From Fan Cowl

Courtesy of BMW OF NORTH AMERICA, INC.

Release charge air duct (1) from rubber mount (2) on fan cowl.

Fig 3: Releasing Charge Air Duct From Rubber Mount On Fan Cowl

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock catch in direction of arrow.

Remove fan cowl towards top.

Fig 4: Removing Fan Cowl

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure fan cowl (1) and holder (2) are in correct installation position.

Fig 5: Identifying Fan Cowl And Holder

Courtesy of BMW OF NORTH AMERICA, INC.