51 43 012 Removing And Installing Rear Left Or Right Side Trim Panel Upper Section
Special tools required:
WARNING:
Risk of injury!
There is a danger of trapping when working in the area of the convertible top system.
Make sure convertible top is not actuated during work.
Necessary preliminary tasks:
- Open convertible top compartment lid, fold in convertible top if necessary
Unclip trim (1) for belt deflector with a suitable plastic wedge.
Release screw (1) and remove belt deflection fitting (2).
Tightening torque 72 11 03AZ .
Unclip trim (3).
Release screw (4).
Unclip side trim panel upper section (5) with special tool 00 9 317 from retainers.
Feed side trim panel upper section (5) out of seat belt and lay to one side.
Installation:
Make sure trim (3), side trim panel upper section (5) and belt guide are correctly seated.
Replacement: