51 71 447 Removing and installing or replacing panel for cover on left or right side member

Necessary preliminary tasks:

Release expansion rivets (1).

Fig 1: Identifying Expansion Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Fig 2: Identifying Entrance Cover Strip Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip trim panel (1) from retainers in areas (2 and 3).

Open door and remove panel (1) in direction of arrow.

Fig 3: Removing Trim Panel From Retainers Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retainers on front holders (1 and 2) must not be damaged.

Fig 4: Identifying Front Holders Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retainers on rear holder (1) must not be damaged.

Fig 5: Identifying Rear Holders Retainers

Courtesy of BMW OF NORTH AMERICA, INC.