41 21 920 Replacing Left Inner B-Pillar Reinforcement (Side Panel Removed)
Read contents of BODY, GENERAL .
Remove or cover those vehicle components in the repair area which are susceptible to heat or dust.
Spot-weld bonding is used on this vehicle. Observe specific PROCEDURE .
Use only approved SPOT-WELDING APPARATUS for repairs!
Place vehicle on straightening bench.
Following new body parts are required:
- (1) Reinforcement, B-pillar, inner
Open weld joints in area (1).
Open SPOT-WELD BONDED JOINTS in area (2)
Remove B-pillar reinforcement.
Installation:
Apply window glass adhesive to CAVITY ACOUSTIC BAFFLE in area (3).
Warning - fire hazard!
Apply window glass adhesive to cavity acoustic baffle in area (4) only after welding new component.
Installation:
Adjust new part in conjunction with side panel to fit.