LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> 1M >> Repair and Diagnosis >> Collision >> Dimensions >> COLLISION - BODY PANEL REPAIR (E82) 1M, 135i & (E88) >> Front Lid >> 41 61 010 Removing And Installing Engine Compartment Lid (Active Pedestrian Protection AFGS)

41 61 010 Removing And Installing Engine Compartment Lid (Active Pedestrian Protection AFGS)

WARNING: Danger of injury!
The BATTERY EARTH LEAD must be clamped off on vehicles with AFGS active pedestrian protection!
Adhere to the following SAFETY INFORMATION so as to avoid a danger of injury by the actuator.
IMPORTANT: Support engine compartment lid in fully opened position with suitable apparatus.
Removal of the engine compartment lid must be carried out with the assistance of a second person.

Follow instructions on ACTIVE PEDESTRIAN PROTECTION  system.

Necessary preliminary tasks: 

Disconnect NEGATIVE BATTERY CABLE .

Release GAS PRESSURE SPRING on engine compartment lid.

Unscrew nuts (1).

Remove engine compartment lid.

Installation note: 

Install engine compartment lid at screw locations to on hinge.

Tightening torque 41 61 1AZ .

If necessary, adjust ENGINE COMPARTMENT LID .

G09850540Courtesy of BMW OF NORTH AMERICA, INC.