63 99 002 Replacing halogen bulb for left (or right) high-beam headlight
WARNING:
Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
NOTE:
Headlight (2) removed for purposes of clarity.
Unlock spring wire clips (1) in direction of arrow.
Remove cover from headlight (2).
Installation note:
Protective cap must be correctly engaged.
Check seal.
Replace protective cap, if necessary.
Observe NOTES REGARDING REPLACEMENT OF THE PROTECTIVE CAP .
Disconnect plug connection (1).
Disengage spring wire clip (2).
Remove bulb (3) towards rear from headlight (4).
Installation note:
Make sure bulb (3) is exactly seated in headlight (4).
Note BULB TYPE .