51 16... Removing and installing/replacing mounting for cup holder at front

Necessary preliminary tasks: 

• Remove STORAGE COMPARTMENT 

Release screws (1).

Remove holder (2) and trim (3).

Installation: 

Spring (4) on holder (2) must not be damaged or missing.

Fig 1: Identifying Screws, Holder And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Following parts must not be damaged or missing:

1. Screw mountings
2. Spring
3. Trim
   Fig 2: Identifying Spring And Trim

   Courtesy of BMW OF NORTH AMERICA, INC.