51 11... Removing and installing/replacing front cover for headlight washer system on left or right (M Technic aerodynamic kit)

Slowly pull out spray nozzle (1) by cover (2).

IMPORTANT: Risk of damage!
When releasing cover (2), grip spray nozzle (1) firmly and then allow to slide back slowly

Release cover (2) sideways from spray nozzle (1).

Fig 1: Pulling Out Spray Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) on cover (2) must not be damaged.

Fig 2: Identifying Guides On Cover

Courtesy of BMW OF NORTH AMERICA, INC.