31 12 080 Removing and installing/replacing both trailing links

Necessary preliminary tasks:

Release nut (1), if necessary, grip at inner Torx socket.

Tightening torque 31 12 2AZ .

Installation note:

Replace self-locking nut.

Fig 1: Identifying Self-Locking Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Release bolt (1) and remove tension strut.

Tightening torque 31 12 1AZ .

Raise locking nut (2) in area of bore and detach from front axle support.

Installation note:

Replace locking nut.

Tighten down screw connection in NORMAL POSITION .

Fig 2: Identifying Front Axle Support Nut And Bolt

Courtesy of BMW OF NORTH AMERICA, INC.