64 22 137 Removing and installing or replacing left fresh-air grille

Special tools required:

Detach mucket (1) in area of left instrument panel trim (2) in direction of arrow.

Lever out left instrument panel trim (2) with special tool 00 9 317 at mounting points (3) and remove.

Installation:

First feed in left instrument panel trim (2) under fresh-air grille, then clip into place.

Fig 1: Detaching Instrument Panel Trim Mucket

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) on left instrument panel trim (2) must not be damaged.

Fig 2: Identifying Instrument Panel Trim And Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Place special tool 00 9 340 through opening of left instrument panel trim.

Lever out left fresh-air grille (1) at outer fastening points (2).

Unlock inner catches (3) if necessary with special tool 00 9 340 .

Remove left fresh-air grille (1) in direction of arrow.

Fig 3: Removing Left Fresh-Air Grille

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) of left fresh air grille (2) must not be damaged.

Fig 4: Identifying Fresh Air Grille Catches

Courtesy of BMW OF NORTH AMERICA, INC.