LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> 135i 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Body Equipment - Repair >> Side Covering With Armrests >> 51 43 000 Removing and installing rear left or right side trim panel

51 43 000 Removing and installing rear left or right side trim panel

Necessary preliminary tasks: 

E81 only: 

Detach mucket (1) in area of side trim panel (3).

Unfasten side trim panel (3) at clips (2) and retainers (4) and remove.

Installation: 

If necessary, replace defective clips (2) and retainers (4).

Fig 1: Detaching Mucket
G05779316Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Install side trim panel (1) in area of trim covers (2 and 3).

Position side trim panel (1) correctly at retainers and clips and clip into position.

Fig 2: Identifying Side Trim Panel, Trim Covers And Clips
G05779317Courtesy of BMW OF NORTH AMERICA, INC.