51 61 011 Removing and installing/replacing V-strut, front axle carrier, left or right

Necessary preliminary tasks: 

• Remove FRONT UNDERBODY PROTECTION 

Release screws (1, 2, 3).

Remove V-strut (4) towards front.

Installation: 

Replace screws.

Make sure screws are installed in correct positions.

• Screw (1) M12x30
• Screw (2) M10x33
• Screw (3) M12x35

Tightening torque 51 71 10AZ .

Fig 1: Identifying V-Strut And Screws

Courtesy of BMW OF NORTH AMERICA, INC.