41 61 000 Removing And Installing Engine Compartment Lid
WARNING:
Danger of injury!
Support engine compartment lid in fully opened position with suitable apparatus.
Removal of the engine compartment lid must be carried out with the assistance of a second person.
Support engine compartment lid in fully opened position with suitable apparatus.
Removal of the engine compartment lid must be carried out with the assistance of a second person.
IMPORTANT:
E92, E93, E82, E88 only:
These instructions only apply to vehicles without active pedestrian protection!
Observe separate procedure for vehicles with ACTIVE PEDESTRIAN PROTECTION !
These instructions only apply to vehicles without active pedestrian protection!
Observe separate procedure for vehicles with ACTIVE PEDESTRIAN PROTECTION !
Read contents of BODY, GENERAL .
Necessary preliminary tasks:
- Disconnect all cable plug connections
IMPORTANT:
During the following operation, secure engine compartment lid against closing.
Detach gas-filled shock absorber on engine compartment lid (1).
Slacken screws (2)
Release screws (3).
Tightening torque 41 61 1AZ .
NOTE:
This work step must be carried out with a second person assisting.
Remove engine compartment lid.
Installation note:
Install engine compartment lid at screw locations to on hinge. This dispenses with the need for adjustment after installation.
If this is not possible, ADJUST ENGINE COMPARTMENT LID .