51 21 225 Removing and installing or replacing inside door opener in left or right front door (up to 03/2007)

Necessary preliminary tasks: 

• Remove FRONT DOOR TRIM .

Unhook Bowden cable for release lever:

• Tighten release lever (1).
• Lever out lock (2).
• Detach Bowden cable (3) towards rear/top.

Installation: 

For fitting, press release lever (1) fully onto door trim panel.

Release nuts (1 and 2).

Remove retaining plate from door trim panel (4).

Installation: 

Retaining plate must be positioned over pin (3).

Lever door opener (1) in direction of arrow out of door trim panel (2).

Installation: 

Fixtures (1) on door opener (2) must not be damaged.