11 13 Oil sump
TIGHTENING TORQUE SPECIFICATIONS - OIL SUMP
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Oil drain plug | N74 | M18 x 1.5 | Replace sealing ring | 40 Nm |
| 2AZ Oil sump top section to crankcase | N74 | M8 | 24 Nm | |
| 3AZ Oil sump bottom section to oil sump top section | N74 | M8 | 24 Nm | |
| 4AZ Oil deflector to oil sump top section | N74 | M6 | 11 Nm | |
| 5AZ Screw plug, oil channel, to oil sump top section | N74 | M24x1.5 | Replace sealing ring | 50 Nm |
| 6AZ Oil condition sensor to oil sump bottom section | N74 | M6 | Replace O-ring | 8.5 Nm |