17 11 000 Removing and installing radiator (N63 B40/B44 O 0/1, N74)
WARNING:
Risk of scalding!
Only perform this repair work after engine has cooled down.
Only perform this repair work after engine has cooled down.
IMPORTANT:
Wear safety goggles and protective gloves.
Necessary preliminary tasks:
- Remove FAN COWL .
- Drain COOLANT .
- Draw off A/C SYSTEM .
- Unlock and detach coolant hoses on radiator.
Release screws (1).
Tightening torque: see 6AZ in 17 10 RADIATOR, EXPANSION TANK
Detach A/C lines (2) and place to one side.
Installation note:
Replace sealing rings.
Release screws (1) on left and right from cover (3).
Tightening torque: see 1AZ in 17 10 RADIATOR, EXPANSION TANK
Release screws (2) behind sealing lip.
Tightening torque: see 1AZ in 17 10 RADIATOR, EXPANSION TANK
Lift out cover (3).
Remove radiator (1) towards top.
Reassemble the vehicle.
Fill A/C SYSTEM .
Visual inspection of cooling system for tightness.