51 24 325 Removing And Installing Or Replacing Left Tension Spring For Rear Lid

Necessary preliminary tasks:

WARNING: Support tailgate in fully opened position with suitable apparatus. Danger of injury!

Press retainer (1) together.

Ball socket (2) jumps out of ball stud.

WARNING: The tailgate will drop down if it is not supported.

Fig 1: Pressing Left Tension Spring Retainer

Courtesy of BMW OF NORTH AMERICA, INC.

Unhook tension spring with damper (1) from tailgate hinge (2).

Fig 2: Removing Tension Spring With Damper From Tailgate Hinge

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

If the removed tension spring (1) is going to be installed again, the tension spring (1) may need to be bent into its original condition by hand.

Fig 3: Identifying Tension Spring Bent And Original Condition

Courtesy of BMW OF NORTH AMERICA, INC.

Picture shows tension spring (1) in original condition.

Fig 4: Identifying Tension Spring In Original Condition

Courtesy of BMW OF NORTH AMERICA, INC.