41 31 010 Replacing Outer Roof Skin (Version With Slide/Tilt Sunroof): Notes
Observe REPAIR STAGE 2 procedure!
Read relevant service information under BODY .
The following parts are required (refer to BMW Electronic Parts Catalogue):
- Roof outer skin
Additional required parts (not pictured):
| Description | Part number | Quantity |
|---|---|---|
| Sound insulation | 07 14 6 949 300 |
1 |
| Blind rivets for holder | 51 41 7 068 752 |
4 |
| Blind rivets for earth strap | 07 14 7 216 857 |
8 |
Additionally required CONSUMABLES :
| Material | Quantity |
|---|---|
| Adhesive K2 | 3 |
| Adhesive K5a | 1 |
| Cleaning agent R1 | 1 |
| Sealant D1 |
Tools also required:
- Roof pliers set, order number: 81 43 2 158 707
See BMW Aftersales Assistance Portal (ASAP)
Service/Technology - Workshop Equipment - Start BMW
Or at: www.bmwbroup-wep.com
NOTE:
Store adhesive at room temperature.
Adhere to adhesive processing temperature of 15 - 28 °C without fail.
Prior to installation, store roof outer skin and vehicle for at least 12 hours at room temperature (17 °C to 35 °C).
Adhere to adhesive processing temperature of 15 - 28 °C without fail.
Prior to installation, store roof outer skin and vehicle for at least 12 hours at room temperature (17 °C to 35 °C).