5.0 Hardening times
- Do not move the vehicle before the adhesive has hardened
.
Check the degree of hardness of the adhesive with a fingernail.
If the adhesive cannot be pressed in any further with a fingernail, the vehicle may be moved (without engine force) for further processing applications (e.g. painting).
- Vehicle strength for driving applications
is achieved after:
48 hours at min. 15 °C object temperature (corresponding to approx. 18 °C room temperature). or 1 hour in the spray booth (spray booth temperature 80 °C/object temperature 60 °C).
- When using radiant heaters, make sure that the object temperature does not exceed 85 °C. Excessively high temperatures will destroy the adhesive.
- Remove contamination caused by adhesive residue immediately.
Hardened adhesive can only be removed mechanically.