41 11 300 Replacing Entrance With Door Post, Left And Right (Partial Replacement, B-Pillar): Notes
Observe procedure for REPAIR STAGE 3 .
Read relevant service information under BODY .
Spot-weld bonding is used on this vehicle. Observe specific procedure. See SPOT-WELD BONDING STEEL COMPONENTS and OPENING ADHESIVE BONDS .
Use only an approved SPOT-WELDING APPARATUS for repairs!
Place vehicle on straightening bench.
The following new body parts are required (see BMW Electronic Parts Catalogue):
- (1) B-pillar with entrance
- (2) ADHESIVE K1 (not shown)
- (3) Blind rivets N1 (3 pieces)